[<<First] [<Back] [Next>] 4 Articles in this categorie

WKC Katana, Nobufusa - Tsuka-ito: Black&white, JAP20BW2812

instead 2.499,00 EUR
only 2.324,07 EUR
you save 7%
(incl. 20% Tax excl. Shipping costs)
 
Print product data sheet
Product No.: JAP20BW2812
Delivery time: ca. 7-8 days ca. 7-8 days
Tell a friend
WKC Katana, Nobufusa - Tsuka-ito: Black&white, JAP20BW2812
WKC Katana, Nobufusa - Tsuka-ito: Black&white, JAP20BW2812

WKC Katana, Nobufusa - Tsuka-ito: Black&white
JAP20BW2812

WKC brings a new Katana, based on the forging technique of Makuri. The blade is made up of a soft steel inside (shingane) coated with a hard steel (kawagane) with higher percentage of carbon. The material is called tama-hagane:

  • Sugata (Blade style):
    • Hand-forged curved blade with Bohi ni tsure-hi (one small and one large groove) The outside groove is larger than the inside grrove. Blade with Chu-Kissaki (tip). The blade spine is iori-mune. The blade is forged from 2 sorts of steel, the softer low carbon steel is embedded into the harder Tamahagane steel. This forging art comes from the Japanese model Makuri which was taught in Japan since centuries but only to the best smith. The two steels are forged up to 32768 layers and thanks to the traditional clay-wrapping technique for differential hardening, you can see the martensite crystals and the Hamonline. This is made visible with our carbon steel blade only by manual polishing. The hardness of the Mune is ca 48° HRC and the Ha (blade edge) is ca 61° HRC.

  • Dimensions:
    • Nagasa (blade length): ca. 71 cm / 28 inch.
    • Sori (curvature): ca.2.54 cm / 1 inch.
    • Moto-Kasane (Thickness at base): ca. 8 mm/ 0.31 inch.
    • Saki-Haba (width at tip): ca. 22 mm / 0.86 inch.
    • Moto-Haba (width at base): ca. 32 mm / 1.26 inch.
    • Balance point (measured from Habaki): ca.10 cm / 3.93 inch
    • Nakago (tongue) with Mei (inscription) according to the tradition: WKC and year of production.

KOSHIRAE

    • Kashira (Cap):
      • Beautifully carved. Carbon steel (C45). Steel oxidized, black color with gold lacquered snake.
    • Tsuka (Grip):
      • Wood grip, adapted to the tongue. 12 inch / 30,5 cm.
    • Tsuka-ito (Handle wrap):
      • Pure silk, black, tight
    • Samé:
      • Real white ray skin.
    • 2 Menuki:
      • Brass, hand-polished, gold-plated. One each side, traditional mounting of Menuki.
    • Habaki:
      • Brass. Made in 1 piece.
    • Seppa:
      • Copper.
    • 2 Mekugi:
      • Bamboo wood, based upon the traditional method to seat the pins. The 2 mekugi-ana are drilled diagonal and conical into the tongue. The mekugi are fitted from opposite side.
    • Tsuba (Guard):
      • Carbon steel (C45), hand-polished. Steel oxidized, black color.
    • Saya (Scabbard):
      • Selected wood. Brown lacquered. Curved according to the Sori. The Koi-guchi (mouth piece) is made of buffalo horn. Saya with kurikata and 2 shitodome to hold the Obi.
    • Sageo:
      • Brown (cord used for tying the Saya to the Obi - knob on the Saya).
    • Total Weight:
      • 1 290 gr. without Saya.
    • Included Accessories:
      • Protective cloth bag with nice colourful embroidery.









Katana, Nobufusa - Tsuka-ito: Black&white
JAP20BW2812

X Wish list
Internetshop by Gambio.de © 2008
eCommerce Engine © 2006 xt:Commerce Shopsoftware